Author Index

A

  • Abdi, mohamad Manufacturing gypsum composite with short fiber of bagasse (sugarcane wastes) [Volume 8, Issue 4, 2021, Pages 12-18]
  • Afshari, Davood Experimental and numerical study on failure of resistance spot welded AA6061-T6 joint under tensile-shear test using GTN model [Volume 8, Issue 7, 2021, Pages 43-51]
  • Afsharmanesh, Bharam A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]
  • Aghaei, Ali Investigation of the effect of ultrasonic vibration on the microstructure and mechanical properties of carbon steel in friction drilling process [Volume 8, Issue 7, 2021, Pages 1-9]
  • Aghaei, morteza Experimental and Numerical investigation of explosive work hardening process on railway frogs [Volume 8, Issue 9, 2021, Pages 23-36]
  • Ahadi Akhlaghi, Ehsan Nondestructive detection of Microstructural Changes due to the Grinding Burn Using Electromagnetic Probes [Volume 8, Issue 3, 2021, Pages 9-19]
  • Ahadi Akhlaghi, Iman Nondestructive detection of Microstructural Changes due to the Grinding Burn Using Electromagnetic Probes [Volume 8, Issue 3, 2021, Pages 9-19]
  • Ahmadi, Hamed Determination of stiffness coefficients and buckling strength of composite lattice conical shells using shell fiber path and lattice rib analysis [Volume 8, Issue 7, 2021, Pages 31-42]
  • Akhavan Farid, Ali The effect of H900 and H1150 heat treatment on the machinability of 15-5 PH stainless steel [Volume 8, Issue 12, 2022, Pages 11-20]
  • Alighoorchi, Iman Experimental investigation of the effects of laser parameters on the strength and size of the weld nugget in laser spot welding of stainless steel sheet 316 [Volume 8, Issue 5, 2021, Pages 23-29]
  • Alinaghi, Kamal Minimizing piston mass of Neuman Esser reciprocating compressors using genetic algorithm [Volume 8, Issue 5, 2021, Pages 30-42]
  • Alinaghian, Mahnoush Experimental and numerical investigation of laser shock peening effects on residual stresses and fatigue life in hollow plate [Volume 8, Issue 3, 2021, Pages 59-67]
  • Araee, Alireza Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel [Volume 8, Issue 2, 2021, Pages 52-64]
  • Arezoo, Behrooz Automation of sheet metal positioning in stamping die design [Volume 8, Issue 1, 2021, Pages 55-67]
  • Asadi, Parviz Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process [Volume 8, Issue 4, 2021, Pages 27-38]
  • Asadollahi, Mohammad Saber Effect of machining parameters on heat-affected zone and kerf width in hybrid laser- waterjet process [Volume 8, Issue 10, 2021, Pages 28-37]
  • Asgari, Mohsen Study of the effect of roller burnishing process parameters on surface roughness and micro hardness of cast iron parts. [Volume 8, Issue 1, 2021, Pages 23-34]
  • Ashenai Ghasemi, Faramarz Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test [Volume 8, Issue 7, 2021, Pages 20-30]
  • Ayatollahi, M. R. Investigating the effect of different variables to reduce delamination due to drilling in composite laminates [Volume 8, Issue 6, 2021, Pages 15-20]
  • Azadi, Mohammad Investigation of effects of the temperature and adding nano-SiO2-particles on high-temperature mechanical properties for the piston aluminum-silicon alloy [Volume 8, Issue 3, 2021, Pages 47-58]
  • Azamirad, Ghasem Automation of sheet metal positioning in stamping die design [Volume 8, Issue 1, 2021, Pages 55-67]

B

  • Bahrami, Mostafa Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy [Volume 8, Issue 8, 2021, Pages 38-51]
  • Baniassadi, Majid Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy [Volume 8, Issue 8, 2021, Pages 38-51]
  • Bazargani, Sahar Reliability Analysis of Failure in Composite Pressure Vessels [Volume 8, Issue 4, 2021, Pages 50-61]
  • Behzadi, Parsa Design and construction of a quadcopter with a new navigation module as a second view for snipers [Volume 8, Issue 8, 2021, Pages 52-59]
  • Behzadnasab, Morteza An experimental investigation on mechanical properties of 3D-printed bio-inspired sandwich panels based on silk cocoon geometry [Volume 8, Issue 4, 2021, Pages 19-26]
  • Boroumand, Farzad Experimental study on stamping of metal/composite laminates reinforced with glass fibers and nanoclay particles [Volume 8, Issue 2, 2021, Pages 1-10]

D

  • Davar, Ali Experimental study and statistical optimization of fabrication parameters affecting the flexural strength of composite grid-stiffened panels [Volume 8, Issue 11, 2022, Pages 1-15]
  • Dehghani, Amirsalar Investigation of the effect of surface transformation hardening by high power diode laser on the microstructure, hardness and wear behavior of AISI O1 cold work tool steel [Volume 8, Issue 1, 2021, Pages 14-22]
  • Dehghani, Amirsalar Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel [Volume 8, Issue 11, 2022, Pages 16-34]
  • Dehkordi, Farnaz Dynamic modeling and decoupled control of linear and angular velocity for robotic fish [Volume 8, Issue 1, 2021, Pages 35-45]

E

  • Ebrahimi, Seyed Hamid Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel [Volume 8, Issue 2, 2021, Pages 52-64]
  • Ebrahimi, Seyed Mohammad Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel [Volume 8, Issue 2, 2021, Pages 52-64]
  • Ebrahimi, Zohreh Design and construction of a quadcopter with a new navigation module as a second view for snipers [Volume 8, Issue 8, 2021, Pages 52-59]
  • Eftekhari, Mohammad Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy [Volume 8, Issue 8, 2021, Pages 38-51]
  • Eivazi bagheri, Hadi Investigation of aluminum surface properties in surface improvement process by electric discharge method [Volume 8, Issue 3, 2021, Pages 1-8]
  • Elahi, S. Hossein Manufacturing gypsum composite with short fiber of bagasse (sugarcane wastes) [Volume 8, Issue 4, 2021, Pages 12-18]
  • Elyasi, Mostafa The effect of H900 and H1150 heat treatment on the machinability of 15-5 PH stainless steel [Volume 8, Issue 12, 2022, Pages 11-20]
  • Emadoddin, Esmaeil Investigation of flow behavior and microstructure modification of ATI425 alloy with initial martensite microstructure in α/β phase and β single phase [Volume 8, Issue 9, 2021, Pages 1-13]
  • Emami, Mohammad Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel [Volume 8, Issue 11, 2022, Pages 16-34]
  • Enjilela, Vali Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings [Volume 8, Issue 3, 2021, Pages 20-34]
  • Eskandari Jam, Jafar Experimental study and statistical optimization of fabrication parameters affecting the flexural strength of composite grid-stiffened panels [Volume 8, Issue 11, 2022, Pages 1-15]
  • Etemadi Haghighi, Shahram Effect of machining parameters on heat-affected zone and kerf width in hybrid laser- waterjet process [Volume 8, Issue 10, 2021, Pages 28-37]

F

  • Fakhimi, Mobina Manufacturing gypsum composite with short fiber of bagasse (sugarcane wastes) [Volume 8, Issue 4, 2021, Pages 12-18]
  • Farahani, Mehdi Computational evaluation of the effect of geometric parameters on the mechanical performance of shape memory alloy stents for use in the breathing systems [Volume 8, Issue 7, 2021, Pages 52-65]
  • Farahani, Mohammadreza Incorporation of Al2O3 powder for improvement of the mechanical and metallurgical properties of multi-passes friction stir welding of Al 2024 [Volume 8, Issue 3, 2021, Pages 35-46]
  • Faraji, Ghader Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy [Volume 8, Issue 8, 2021, Pages 38-51]
  • Farhadi, Mahdi Experimental study and statistical optimization of fabrication parameters affecting the flexural strength of composite grid-stiffened panels [Volume 8, Issue 11, 2022, Pages 1-15]
  • Farhang, Majid Incorporation of Al2O3 powder for improvement of the mechanical and metallurgical properties of multi-passes friction stir welding of Al 2024 [Volume 8, Issue 3, 2021, Pages 35-46]
  • Fereiduni, Fateme Investigation of the effect of different parameters on force in the second phase of two-dimensional nanomanipulation [Volume 8, Issue 2, 2021, Pages 23-31]
  • Fereshteh-saniee, Faramarz Microstructural Studies and Mechanical Properties of Hydroforming Process of AZ31B Magnesium and AA 2024 Aluminum Alloys Sheets at Elevated Temperatures [Volume 8, Issue 10, 2021, Pages 39-48]
  • Freidoon, Abdolhossein Investigation of effects of the temperature and adding nano-SiO2-particles on high-temperature mechanical properties for the piston aluminum-silicon alloy [Volume 8, Issue 3, 2021, Pages 47-58]

G

  • Ghadyani, Mohsen Evaluation of the wear behavior on nanostructure and mechanical characteristics of hydrodynamic sliding bearings [Volume 8, Issue 3, 2021, Pages 20-34]
  • Ghafarirad, Hamed A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]
  • Ghasemi meyghani, Hamid Prototyping of piezoceramic-polymer composites using Solution Casting method for use in acoustic Transducers [Volume 8, Issue 5, 2021, Pages 14-22]
  • Ghesmati-Kucheki, Hadi Investigating the effect of different variables to reduce delamination due to drilling in composite laminates [Volume 8, Issue 6, 2021, Pages 15-20]
  • Ghodsi, Mojtaba Design and Fabrication of a Contactless Hybrid Static Magnetostrictive Force-Torque Sensor Using Galfenol [Volume 8, Issue 9, 2021, Pages 50-59]
  • Ghorbanhosseini, Sadegh Microstructural Studies and Mechanical Properties of Hydroforming Process of AZ31B Magnesium and AA 2024 Aluminum Alloys Sheets at Elevated Temperatures [Volume 8, Issue 10, 2021, Pages 39-48]
  • Golabi, Sa'id Minimizing piston mass of Neuman Esser reciprocating compressors using genetic algorithm [Volume 8, Issue 5, 2021, Pages 30-42]
  • Golabi, Saeid Experimental and numerical investigation of laser shock peening effects on residual stresses and fatigue life in hollow plate [Volume 8, Issue 3, 2021, Pages 59-67]
  • Goodarzi, Arash Fabrication of polylactic acid / polyethylene glycol/ hydroxyapatite nanoparticles nanocomposite foam by mass porosity method [Volume 8, Issue 9, 2021, Pages 37-49]
  • Gorji, Hamid Investigation of aluminum surface properties in surface improvement process by electric discharge method [Volume 8, Issue 3, 2021, Pages 1-8]

H

  • Hadad, Mohammadjafar Experimental investigation of the effects of hot turning parameters on the cutting tool wear and surface roughness of AISI630 hardened stainless steel [Volume 8, Issue 2, 2021, Pages 52-64]
  • Hafizi Atabak, Hamidreza Experimental and Numerical investigation of explosive work hardening process on railway frogs [Volume 8, Issue 9, 2021, Pages 23-36]
  • Halimi Khosroshahi, Hamed Effect of temperature-dependent physical properties on finite element modeling of laser welding of titanium alloy [Volume 8, Issue 10, 2021, Pages 16-27]
  • Hamidi, Omid Experimental and numerical study on failure of resistance spot welded AA6061-T6 joint under tensile-shear test using GTN model [Volume 8, Issue 7, 2021, Pages 43-51]
  • Hasanabadi, Ali Microstructure design of heterogeneous material using multisided patch [Volume 8, Issue 2, 2021, Pages 32-40]
  • Heydari Beni, Mohsen Experimental study and statistical optimization of fabrication parameters affecting the flexural strength of composite grid-stiffened panels [Volume 8, Issue 11, 2022, Pages 1-15]
  • Hosseini, Seyed Vahid Investigation of the Effect of Substrate Material in Nano-indentation Process using Molecular Dynamics Simulation [Volume 8, Issue 10, 2021, Pages 1-15]
  • Hosseini, Seyyed Mohammad The effect of flexible die support from polymeric foam on the incremental forming of polyethylene sheet [Volume 8, Issue 10, 2021, Pages 38-48]
  • Hosseini Vajari, Mostafa An experimental investigation on mechanical properties of 3D-printed bio-inspired sandwich panels based on silk cocoon geometry [Volume 8, Issue 4, 2021, Pages 19-26]

I

  • Ilkhani, Bahram A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]
  • Irani Rahaghi, Mohsen Experimental and numerical investigation of laser shock peening effects on residual stresses and fatigue life in hollow plate [Volume 8, Issue 3, 2021, Pages 59-67]

J

  • Jabarshayan, Rasoul Investigation of microstructure and hardness of recycled aluminum seamless tube using friction stir consolidation [Volume 8, Issue 11, 2022, Pages 35-42]
  • Jabbaripour, Behzad Comparison of Dimensional, Geometrical Tolerances and Surface Integrity in Conventional Drilling and Helical Milling Processes on Steel Multi-layer (Sandwich) Workpiece [Volume 8, Issue 5, 2021, Pages 51-62]
  • Jafari, Mahdi Experimental study of the shunting effect on tensile-shear strength of resistance spot welds in AA2219 sheets [Volume 8, Issue 12, 2022, Pages 44-50]
  • Jafarpoor, Mahdi Experimental study of the shunting effect on tensile-shear strength of resistance spot welds in AA2219 sheets [Volume 8, Issue 12, 2022, Pages 44-50]
  • Jahantab, Seyed hassan Investigation of the Effect of Backpressure and Friction on Material Flow in the Twist Extrusion Process of 6063 Aluminum Alloy [Volume 8, Issue 6, 2021, Pages 1-6]
  • Jalili, Mohammad Mahdi Investigation and optimization of parameters affecting surface roughness in single crystal copper nanomachining process using molecular dynamics method [Volume 8, Issue 10, 2021, Pages 49-60]
  • Jasimi Zindashti, Niromand A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]

K

  • Kahrobaee, Saeed Nondestructive detection of Microstructural Changes due to the Grinding Burn Using Electromagnetic Probes [Volume 8, Issue 3, 2021, Pages 9-19]
  • Kami, Abdolvahed Investigation of the Effect of Backpressure and Friction on Material Flow in the Twist Extrusion Process of 6063 Aluminum Alloy [Volume 8, Issue 6, 2021, Pages 1-6]
  • Karafi, Mohammad Reza Design and Fabrication of a Contactless Hybrid Static Magnetostrictive Force-Torque Sensor Using Galfenol [Volume 8, Issue 9, 2021, Pages 50-59]
  • Karami Nezhad, Kian Nondestructive detection of Microstructural Changes due to the Grinding Burn Using Electromagnetic Probes [Volume 8, Issue 3, 2021, Pages 9-19]
  • Karian, Alireza Experimental investigation of the effects of laser parameters on the strength and size of the weld nugget in laser spot welding of stainless steel sheet 316 [Volume 8, Issue 5, 2021, Pages 23-29]
  • Kashefi, Mehrdad Nondestructive detection of Microstructural Changes due to the Grinding Burn Using Electromagnetic Probes [Volume 8, Issue 3, 2021, Pages 9-19]
  • Kashyzadeh, Kazem Reza Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test [Volume 8, Issue 7, 2021, Pages 20-30]
  • Khorsand, Hamid Investigation the shear strength and the microstructure of the dissimilar joint of S.S310S to zirconia ceramic using filler without active elements [Volume 8, Issue 5, 2021, Pages 1-13]
  • Khorsand, Hamid Synthesis and Investigation of Properties of Polyethylene Oxide Bonding System for Production of High Density 316L Alloy Parts by Metal Injection Molding [Volume 8, Issue 8, 2021, Pages 60-69]
  • Khoshanjam, Ali The Effects of Angular Velocity and Combination of AIO2 and SiC Abrasive Particle by Use of NMAF Method [Volume 8, Issue 6, 2021, Pages 26-33]

M

  • Maghsoudpour, Adel The effect of H900 and H1150 heat treatment on the machinability of 15-5 PH stainless steel [Volume 8, Issue 12, 2022, Pages 11-20]
  • Mahdiyar, Nafise Investigation of the Effect of Substrate Material in Nano-indentation Process using Molecular Dynamics Simulation [Volume 8, Issue 10, 2021, Pages 1-15]
  • Mazdak, Siamak Selection of Appropriate Ductile Fracture Criterion to Predict Failure of Folded Cross Section Profiles in Reshaping Process [Volume 8, Issue 8, 2021, Pages 24-37]
  • Meshkabadi, Ramin Investigation of production process parameters effects on the mechanical properties of Thermex rebar by Taguchi method [Volume 8, Issue 2, 2021, Pages 41-51]
  • Mirzaloo, Mehdi Experimental investigation of the effects of laser parameters on the strength and size of the weld nugget in laser spot welding of stainless steel sheet 316 [Volume 8, Issue 5, 2021, Pages 23-29]
  • Mirzamohammadi, Shahed Design and Fabrication of a Contactless Hybrid Static Magnetostrictive Force-Torque Sensor Using Galfenol [Volume 8, Issue 9, 2021, Pages 50-59]
  • Modabberifar, Mehdi Investigation of the effect of different parameters on force in the second phase of two-dimensional nanomanipulation [Volume 8, Issue 2, 2021, Pages 23-31]
  • Modabberifar, Mehdi Experimental investigation of the effects of laser parameters on the strength and size of the weld nugget in laser spot welding of stainless steel sheet 316 [Volume 8, Issue 5, 2021, Pages 23-29]
  • Mohammadi, Meysam Prediction of hot deformation behavior of 304 stainless steel using Johnson-Cook equation [Volume 8, Issue 12, 2022, Pages 34-43]
  • Mohebbi, Morteza Investigating the effect of nonlinear strain path on the mechanical properties of sheet metal to predict burst pressure of composite Rupture disc [Volume 8, Issue 4, 2021, Pages 1-11]
  • Mojgani, Ali Construction of constitutive equations, modified dynamic materials model and strain-rate sensitivity coefficient map for investigation of hot and warm working instability of 2205 duplex stainless steel [Volume 8, Issue 12, 2022, Pages 1-10]
  • Moslemi Naeini, Hassan Experimental study and sobol sensitivity analysis in optimizing the effective parameters of dry turning process of aluminum alloy 6061-T6 [Volume 8, Issue 8, 2021, Pages 12-23]

N

  • Naderi, Arash Investigation of effects of the temperature and adding nano-SiO2-particles on high-temperature mechanical properties for the piston aluminum-silicon alloy [Volume 8, Issue 3, 2021, Pages 47-58]
  • Naderli, Rasoul Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process [Volume 8, Issue 4, 2021, Pages 27-38]
  • Nasrollah, Amin Numerical and experimental analysis on the properties of ionic-polymer-metal composites [Volume 8, Issue 6, 2021, Pages 21-25]
  • Nazari, Mohammad Incorporation of Al2O3 powder for improvement of the mechanical and metallurgical properties of multi-passes friction stir welding of Al 2024 [Volume 8, Issue 3, 2021, Pages 35-46]
  • Nematzadeh, Fardin Computational evaluation of the effect of geometric parameters on the mechanical performance of shape memory alloy stents for use in the breathing systems [Volume 8, Issue 7, 2021, Pages 52-65]
  • Nematzadeh, Fardin Construction of constitutive equations, modified dynamic materials model and strain-rate sensitivity coefficient map for investigation of hot and warm working instability of 2205 duplex stainless steel [Volume 8, Issue 12, 2022, Pages 1-10]
  • Nikkhoo, Mohammad Computer-aided Porous Structure Implant Design and Analysis using Triply periodic minimal surface [Volume 8, Issue 1, 2021, Pages 46-54]
  • Norouzi Sahraei, Hossein Nondestructive detection of Microstructural Changes due to the Grinding Burn Using Electromagnetic Probes [Volume 8, Issue 3, 2021, Pages 9-19]
  • Nosratzadegan, Keyvan Experimental and Numerical investigation of explosive work hardening process on railway frogs [Volume 8, Issue 9, 2021, Pages 23-36]
  • Nouri, Alireza Construction of constitutive equations, modified dynamic materials model and strain-rate sensitivity coefficient map for investigation of hot and warm working instability of 2205 duplex stainless steel [Volume 8, Issue 12, 2022, Pages 1-10]
  • Nouri Kamari, Majid Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test [Volume 8, Issue 7, 2021, Pages 20-30]

O

  • Oladzad Abbasabadi, Kiamehr A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]

P

  • Parsa, Ako Presentation of a new construction methodology and experimental study of the energy absorption of pyramid core sandwich panels [Volume 8, Issue 7, 2021, Pages 10-19]
  • Parsakhoo, Naser Comparison of Dimensional, Geometrical Tolerances and Surface Integrity in Conventional Drilling and Helical Milling Processes on Steel Multi-layer (Sandwich) Workpiece [Volume 8, Issue 5, 2021, Pages 51-62]
  • Pol, Mohammad Hossein Experimental study on stamping of metal/composite laminates reinforced with glass fibers and nanoclay particles [Volume 8, Issue 2, 2021, Pages 1-10]
  • Pourmoradkaleybar, Sepehr Investigation the shear strength and the microstructure of the dissimilar joint of S.S310S to zirconia ceramic using filler without active elements [Volume 8, Issue 5, 2021, Pages 1-13]
  • Pouyafar, Vahid Investigation of production process parameters effects on the mechanical properties of Thermex rebar by Taguchi method [Volume 8, Issue 2, 2021, Pages 41-51]

R

  • Rabiezadeh, Amin Dissimilar welding of 5xxx and 7xxx aluminum alloy by self-reacting friction stir welding method [Volume 8, Issue 1, 2021, Pages 1-13]
  • Rafiee, Roham Reliability Analysis of Failure in Composite Pressure Vessels [Volume 8, Issue 4, 2021, Pages 50-61]
  • Rahiminezhad, Mohammad Taghi Experimental and Numerical investigation of explosive work hardening process on railway frogs [Volume 8, Issue 9, 2021, Pages 23-36]
  • Rahimi Sherbaf, Gholam Hossein Numerical simulation of CNG fuel tank behavior made of epoxy/glass composite in design mode considering constant and variable thicknesses under burst pressure test [Volume 8, Issue 7, 2021, Pages 20-30]
  • Rahmati, Sadegh Computer-aided Porous Structure Implant Design and Analysis using Triply periodic minimal surface [Volume 8, Issue 1, 2021, Pages 46-54]
  • Rakhshkhorshid, Masoud The effect of flexible die support from polymeric foam on the incremental forming of polyethylene sheet [Volume 8, Issue 10, 2021, Pages 38-48]
  • RASOULI, Seyedalireza The effect of machining parameters of magnetic abrasive finishing on free surface of aluminum alloy [Volume 8, Issue 11, 2022, Pages 63-75]
  • Rezaei Ashtiani, Hamidreza Prediction of hot deformation behavior of 304 stainless steel using Johnson-Cook equation [Volume 8, Issue 12, 2022, Pages 34-43]
  • Riazi, Amirhosein A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]
  • Rokhgireh, Hojjatollah Numerical Investigation of Creep Behavior Turbine blade made of Inconel 939 Superalloy with different Creep Models [Volume 8, Issue 12, 2022, Pages 51-59]

S

  • Sadedel, Majid Dynamic modeling and decoupled control of linear and angular velocity for robotic fish [Volume 8, Issue 1, 2021, Pages 35-45]
  • Sadeghi kia, Mohammad Prototyping of piezoceramic-polymer composites using Solution Casting method for use in acoustic Transducers [Volume 8, Issue 5, 2021, Pages 14-22]
  • Safari, Ebrahim Effect of temperature-dependent physical properties on finite element modeling of laser welding of titanium alloy [Volume 8, Issue 10, 2021, Pages 16-27]
  • Safari, Mehdi Mathematical Modeling, Sobol Sensitivity Analysis and Optimization of Main Parameters in Drilling of E-glass/epoxy Laminated Composites [Volume 8, Issue 11, 2022, Pages 43-53]
  • Salafzon, Ali Dissimilar welding of 5xxx and 7xxx aluminum alloy by self-reacting friction stir welding method [Volume 8, Issue 1, 2021, Pages 1-13]
  • Salamat-Talab, Mazaher Mathematical Modeling, Sobol Sensitivity Analysis and Optimization of Main Parameters in Drilling of E-glass/epoxy Laminated Composites [Volume 8, Issue 11, 2022, Pages 43-53]
  • Samadi, Mohammad reza The Effects of Angular Velocity and Combination of AIO2 and SiC Abrasive Particle by Use of NMAF Method [Volume 8, Issue 6, 2021, Pages 26-33]
  • Sarkari, Mahdi Computer-aided Porous Structure Implant Design and Analysis using Triply periodic minimal surface [Volume 8, Issue 1, 2021, Pages 46-54]
  • Seyedkashi, S. M. Hossein Experimental study on stamping of metal/composite laminates reinforced with glass fibers and nanoclay particles [Volume 8, Issue 2, 2021, Pages 1-10]
  • Shahrajabian, Hamzeh Fabrication of polylactic acid / polyethylene glycol/ hydroxyapatite nanoparticles nanocomposite foam by mass porosity method [Volume 8, Issue 9, 2021, Pages 37-49]
  • Shahriari, Behrooz Experimental study of the shunting effect on tensile-shear strength of resistance spot welds in AA2219 sheets [Volume 8, Issue 12, 2022, Pages 44-50]
  • Shahverdi, Hamid Reza Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel [Volume 8, Issue 11, 2022, Pages 16-34]
  • Shakouri, Ehsan Study of the effect of roller burnishing process parameters on surface roughness and micro hardness of cast iron parts. [Volume 8, Issue 1, 2021, Pages 23-34]
  • Shakouri, Ehsan Comparison of Dimensional, Geometrical Tolerances and Surface Integrity in Conventional Drilling and Helical Milling Processes on Steel Multi-layer (Sandwich) Workpiece [Volume 8, Issue 5, 2021, Pages 51-62]
  • Shakouri, Ehsan Evaluation of rotary fatigue bending and creep performance in PLA components during fused deposition modeling [Volume 8, Issue 9, 2021, Pages 60-69]
  • Shalvandi, Maghohd Investigation of the effect of ultrasonic vibration on the microstructure and mechanical properties of carbon steel in friction drilling process [Volume 8, Issue 7, 2021, Pages 1-9]
  • Sheikhi, Mohammad Morad Design and Fabrication of a Contactless Hybrid Static Magnetostrictive Force-Torque Sensor Using Galfenol [Volume 8, Issue 9, 2021, Pages 50-59]
  • Soleimanimehr, Hamid Numerical and experimental analysis on the properties of ionic-polymer-metal composites [Volume 8, Issue 6, 2021, Pages 21-25]
  • Soleimanimehr, Hamid Effect of machining parameters on heat-affected zone and kerf width in hybrid laser- waterjet process [Volume 8, Issue 10, 2021, Pages 28-37]
  • Soleimanimehr, Hamid The effect of H900 and H1150 heat treatment on the machinability of 15-5 PH stainless steel [Volume 8, Issue 12, 2022, Pages 11-20]
  • Soltanpour, Mahdi Experimental investigation of the joinability of three-layer aluminum/ polymer/ aluminum composite sheets by the clinching process [Volume 8, Issue 4, 2021, Pages 27-38]
  • Sonboli, Ali Construction of constitutive equations, modified dynamic materials model and strain-rate sensitivity coefficient map for investigation of hot and warm working instability of 2205 duplex stainless steel [Volume 8, Issue 12, 2022, Pages 1-10]

T

  • Tabatabee, seyed ali Experimental and Numerical investigation of explosive work hardening process on railway frogs [Volume 8, Issue 9, 2021, Pages 23-36]
  • Taghvaeipour, Afshin A Force Analysis of Rotary Kiln Elastomers in the Neyzar Qom Cement Company Considering Static, Dynamic, and Thermal Loadings [Volume 8, Issue 6, 2021, Pages 34-40]
  • Taheri, Moein Investigation of the effect of different parameters on force in the second phase of two-dimensional nanomanipulation [Volume 8, Issue 2, 2021, Pages 23-31]
  • Taheri, Moiein Experimental investigation of the effects of laser parameters on the strength and size of the weld nugget in laser spot welding of stainless steel sheet 316 [Volume 8, Issue 5, 2021, Pages 23-29]
  • Tahmasbi, Vahid Experimental study and sobol sensitivity analysis in optimizing the effective parameters of dry turning process of aluminum alloy 6061-T6 [Volume 8, Issue 8, 2021, Pages 12-23]
  • Tahmasbi, Vahid Mathematical Modeling, Sobol Sensitivity Analysis and Optimization of Main Parameters in Drilling of E-glass/epoxy Laminated Composites [Volume 8, Issue 11, 2022, Pages 43-53]
  • Talebi-Ghadikolaee, Hossein Selection of Appropriate Ductile Fracture Criterion to Predict Failure of Folded Cross Section Profiles in Reshaping Process [Volume 8, Issue 8, 2021, Pages 24-37]
  • Tavari, Hojjatollah Investigation and optimization of parameters affecting surface roughness in single crystal copper nanomachining process using molecular dynamics method [Volume 8, Issue 10, 2021, Pages 49-60]
  • Torkamany, Mohammad Javad Investigation of the effect of surface transformation hardening by high power diode laser on the microstructure, hardness and wear behavior of AISI O1 cold work tool steel [Volume 8, Issue 1, 2021, Pages 14-22]
  • Tutunchi, Abolfazl Comparison of the effect of quenching-tempering (Q-T) and quenching-partitioning-tempering (Q-P-T) heat treatments on the microstructure and mechanical properties of a high strength steel containing Ti micro-alloy [Volume 8, Issue 5, 2021, Pages 43-50]

V

  • Vakili Tahami, Farid Effect of temperature-dependent physical properties on finite element modeling of laser welding of titanium alloy [Volume 8, Issue 10, 2021, Pages 16-27]

Y

  • Yaghoubi, Saeed Microstructural Studies and Mechanical Properties of Hydroforming Process of AZ31B Magnesium and AA 2024 Aluminum Alloys Sheets at Elevated Temperatures [Volume 8, Issue 10, 2021, Pages 39-48]
  • Yazdani, Mojtaba The Effect of Thickness, Welding Metals Sequence and Composition on Residual Stresses in Welding Gas Steel Pipes using LTT filler [Volume 8, Issue 2, 2021, Pages 11-22]
  • Yazdani, Mojtaba Experimental and Numerical Comparison of the Effects of Phase Trasformation Changes and Asymmetric Welding on Residual Stresses in Gas Pipe Welding Using LTT Filler [Volume 8, Issue 4, 2021, Pages 39-49]
  • Yazdani, Mojtaba Presentation of a new construction methodology and experimental study of the energy absorption of pyramid core sandwich panels [Volume 8, Issue 7, 2021, Pages 10-19]

Z

  • Zabihi Gargari, Mohammad Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel [Volume 8, Issue 11, 2022, Pages 16-34]
  • Zakeri, Mahnaz Investigating the effect of different variables to reduce delamination due to drilling in composite laminates [Volume 8, Issue 6, 2021, Pages 15-20]
  • Zeinolabedin Beygi, Ali Experimental study and sobol sensitivity analysis in optimizing the effective parameters of dry turning process of aluminum alloy 6061-T6 [Volume 8, Issue 8, 2021, Pages 12-23]
  • Zeinolabedin Beygi, Ali Mathematical Modeling, Sobol Sensitivity Analysis and Optimization of Main Parameters in Drilling of E-glass/epoxy Laminated Composites [Volume 8, Issue 11, 2022, Pages 43-53]
  • Zohrabi, Maziar Selection of Appropriate Ductile Fracture Criterion to Predict Failure of Folded Cross Section Profiles in Reshaping Process [Volume 8, Issue 8, 2021, Pages 24-37]